Description
3-in-1 Handheld Multitester Oscilloscope
The new FNIRSI DSO-TC4 Is a signficant upgrade from the previous generation DSO-TC3 Multitester. It is a handheld Multitester Oscilloscope with 10MHz bandwidth and 48Ms/s sampling rate. It features a digital Oscilloscope, Function Generator, Component Tester and LCR Meter.
It is very compact and lightweight with low power consumption. It has a USB Type-C charging interface and a lithium battery. This oscilloscope has a high-resolution colour screen and minimalist keyboard design. Easily connect the DSO-TC4 to your PC via the USB data cable to save your data.
An important upgrade is the Anti-burn overvoltage protection mechanism: The capacitance resistance ESR tester automatically identifies undischarged capacitors and automatically discharges them at the moment of insertion and locking, effectively avoiding accidental burning.
The DSO-TC4 comes with a x1x10 100MHz Oscilloscope Probe to enable x10 voltage scaling in your measurements.
A very handy multitester oscilloscope, function generator and component tester for the beginner, for fieldwork, and as a handy tester on your desk.
DSO-TC4 Review Video
Quick Introduction Video & How to Use the Component Tester
Demo video
Oscilloscope Specifications:
- Bandwidth: 10MHz, 1CH
- Sample Rate: 48MSa/s
- Input Impedance: 1M-ohm
- Test Voltage Range: 1:1 Probe: 80Vpp (+40V) ; 10:1 Probe: 800Vpp (+400V)
- Trigger Modes: Auto, Single, Normal
- Trigger Type: rising edge, falling edge
- Automatic Measurement: Max, Min, Avg, RMS, Vpp, Frequency, Cycle, Duty Cycle
- AUTO One-key function – grab and save a waveform instantly
- Test Voltage range: 400V
- Vertical Sensitivity: 10mV ~ 10V/div
- Horizontal Time Base range: 50ns ~ 20s
Signal Generator Specifications:
- 13 Waveform types: sine, square, pulse, triangle, ramp, DC, etc.
- Output Frequency: 1 ~ 50KHz
- Output Voltage: 0.1~3.0V adjustable
- Output Duty ratio adjustable 0~100%
Component Tester Specifications:
- Automatically identifies and measures various transistors, including NPN and PNP triode, N-channel and P-channel MOSFETs, JFET, diodes, double diodes, thyristors, capacitors etc., passive components
- Automatic detection of pin definitions
- Overvoltage Anti-burn Protection on Component Tester
General Specifications:
- 1-Year Limited Warranty (does not cover damage due to user error)
- Battery Capacity: 1500mAh HQ Polymer Lithium (4 hours use-time)
- Display: 2.8″ TFT color display
- Dimensions: 142 x 90 x 27.5mm (L x W x H)
- Weight: 186g
The FNIRSI-DSO-TC4 Multitester Package Includes:
FNIRSI-DSO-TC4 Multitester Oscilloscope, x1x10 Oscilloscope Test Probe x 1, BNC-MCX Adapter x 1, Test Hooks x 3, Alligator Clip Cable x 1, USB Type-C Charger Cable, Printed User Manual.
Also see the Hantek-2D42 Multitester
