100MHz Oscilloscope Probe

R235.00

P6100 100MHz bandwidth Oscilloscope Test Probe with a switch to select between X1 or X10 voltage scaling. Works with any Oscilloscope

Categories: ,

Description

100MHz Oscilloscope Probe X1/X10

The FNIRSI P6100 Oscilloscope probe has a bandwidth of 100MHz and a switch to select between X1 or X10 voltage attenuation so you can scale your measurement either by one or by a factor of 10.   It will work with any oscilloscope, both analogue and digital.
This probe can measure intermediate and low-frequency signals.  It has a contractive-type acuminate hook and a 12cm earth wire with an alligator clip.  It sells as a single oscilloscope probe.
To use the P6100 Oscilloscope Probe with the FNIRSI DSO-TC3 Handheld Oscilloscope you will need a BNC-MCX Adapter.

Specifications:

  • Attenuation: x1x10
  • Input resistance: 1MΩ: 10MΩ +- 2%
  • Input Capacitance: x1: 60pF~120pF; x10: 13.5pF~16.5pF
  • System Bandwidth: x1: DC-10MHz; x10: DC-100MHz
  • Rise Time: x1: 35ns; x10: 3.5ns
  • Max Input Voltage: x1: 150V RMS CAT II; x10: 300V RMS CAT II
  • Compensation Range: 15~45pF
  • Safety Standards: IEC61010-031
  • Cable Length: 110cm

Included in the P6100 Oscilloscope Probe Set:
Oscilloscope Probe x 1, Retractable Hook x 1, Adjustment Tool x 1, Locating Sleeve x 2, Color-coded Rings x 8, Ground Lead x 1, Ground Spring x 1.